Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

jUST FINISHED SHARPENING MY BLADE ON A 5' WOODS AND HAD THE SAME PROBLEM. i GOT OUT MY 24

HELP Cannot get the blades off my finish mower
Mowers Field and Finish
Replies 12 Post by AL JOHNSON

I have a MT180D which is the same as the IH235. Very nice tractor. Your price is reasonable if the condition is good.

Ford 1000 and a IH 234 235
Other Tractor Brands
Replies 7 Post by al johnson

I am putting a loader on a MT180D. Bush Hog makes a bracket kit but I am not sure how to tie the hydraulics into the tractor. Has anyone put a loader on a Mitsubishi tractor?

Mitsubishi Loader
Mitsubishi
Replies 4 Post by al johnson

A 5' flail mower has about 60 L shaped cutter baldes. To sharpen them you take them off the mower and sharpen each one independently. They are easy to sharpen but take alot of time. A flail mower is safe to operate since it does not throw stuff out. It produces a cut better than a bush hog but not as nice as a finish mower.

Flail Mowers
Mowers Field and Finish
Replies 3 Post by al johnson

For $4000 I can buy a Mitsubishi MT180D(4x4 19hp) with a 5' Woods RM360 a 4' box blade and a 6' standard rear blade. All equipment is in excellent condition and the tractor only has 500 hours. The mower is 3 years old and like new. Both balds are heavy duty with cutting edges. Is this a good price?

Mitcusishi tractor price
Other Tractor Brands
Replies 4 Post by Al Johnson

Unlike big tractors which typically have duals that mount to an extended axle compact tractors will have to be banded together thus increaseing the stress on the hub which is cast iron. I have made duals by having a sheet metal shop roll a rig of flat stock usually 1/4

Can you install Duel tires on a compact
Parts and Repair
Replies 8 Post by Al Johnson

Looking for a used 5' rear discharge finish mower. I live in Ohio

Wanted used 5 rear discharge mower
Other Tractor Brands
Replies 1 Post by Al Johnson

I have a MT180D mitsubishi and I am looking for a front loader. The Bush Hog loader only lists fitting a MT160 but the woods says it will fit a MT160 or a MT180. Are the MT180 and the MT160 the same tractors at least the frames. Has anyone mounted a loader on these tractors. I looked at Cad plans but they do not make a QT loader.

MT180 or MT160 mitsubishi
Mitsubishi
Replies 3 Post by Al Johnson

jsut bought a MT180D mitsubishi which is the same tractor for 2600 no mower<br>

What s a Int Harvester 234 worth
Other Tractor Brands
Replies 3 Post by Al johnson

I have heard that JD is selling ROP's at cost for about $300. I recently checked on the price for a ROP for a Mitsubishi MT180D from Stull and they said it would be $700 which was $200 below Mitsubishi cost. Is there a ROP for a JD that will fit or get close to fitting a MT180D. For $500 I can do alot of welding.

ROP s for tractors
Other Tractor Brands
Replies 7 Post by Al Johnson

I am interested in your tractor. Where are you located.

Mitsubishi MT372D Compact Tractor
Mitsubishi
Replies 6 Post by Al johnson